For general boundary demarcation and decorative use, side gates are commonly around 1.0 m to 1.2 m high. For side or rear access where security and privacy are more of a concern, heights of 1.8 m to 2.0 m are typical. The metal frame allows taller gates to remain rigid without excessive weight compared to a solid steel panel.

Composite infill panels combine well with a metal frame on a pedestrian gate because the gate is opened and closed frequently. The metal frame handles the structural load and hinge stress of repeated operation, while the composite panels provide a wood-look finish without the need for regular painting, staining, or treatment. This matters more on a side gate than on a large driveway gate because pedestrian gates are cycled far more often.

For a side gate adjacent to a highway used by vehicles, the height limit for permitted development is generally 1 m. If the gate is not adjacent to a highway, the limit is typically 2 m. If your proposed gate exceeds the relevant threshold, planning permission may be required. We recommend checking with your local planning authority, as interpretation can vary.

Options include a standard latch, a key-operated lock, or a lockable latch with a handle. For pedestrian side gates, we can also supply a rim latch or a ring latch depending on whether you need access from one side only or both. The metal frame provides solid fixing points for the latch and keep, which helps the lock mechanism remain aligned over time.

Yes, our gates can be hung on either side to suit your requirements. If you have a preference for which way the gate opens, let us know at the point of order and we will set the hinges and latch accordingly.

Yes, this is often possible provided your existing posts meet the necessary requirements for the size and weight of the gate. Contact us with details of your posts and we can check compatibility before you order.

Composite side gates can be supplied with either a steel or aluminium frame. Steel offers greater rigidity for a given section size, while aluminium is naturally corrosion-resistant and lighter, which can be an advantage on a frequently used pedestrian gate. Both are available with a powder-coated finish in a range of RAL colours.

Pedestrian side gates use lighter-duty hinges than driveway gates because the gate mass is lower, but the hinge positions are set to account for more frequent opening and closing cycles. We recommend lubricating hinges periodically to keep them working smoothly, particularly on a gate in daily use.

Yes, swing motor kits can be added at order or retrofitted later. For a frequently used pedestrian gate, an electric release or intercom-controlled latch is also an option. The lighter weight of a metal frame with composite infill panels helps keep motor loads manageable.

Your gate is delivered fully built and ready to install, not flat-packed. It is manufactured to your confirmed height and width measurements. We deliver nationwide, though heavier gates may require suitable unloading facilities on-site.