Composite Side Gate | Side Gates | CSG31
Original price was: £465.72.£300.00Current price is: £300.00.+ Price depends upon Sizes
This composite side gate design pairs a wrought iron-style upper frame with spear-top finials and twisted basket balusters against a solid wood-effect composite lower panel with diagonal bracing and a central star motif. The combination gives an ornamental look up top with the added privacy and low-upkeep appeal of composite boarding below.
Description
This composite side gate design brings together two distinct looks in one frame: an open, decorative metal top section with spear-point finials and twisted balusters, and a solid wood-effect composite lower panel finished with diagonal bracing and a central star medallion. The render shows a gate built for side access where both ornamental detail and a screened lower half are wanted, giving passers-by an attractive view while keeping the lower portion private.
Design Details of This Composite Side Gate
Every element of this composite side gate has been laid out to balance decoration with function, moving from an open railed top to a fully boarded base.
Upper Railing Section
- Vertical metal bars topped with pointed spear finials along the full width of the gate
- Curled scroll detailing at each top corner for a traditional wrought iron look
- Rows of twisted basket balusters spaced evenly between the verticals
- A decorative band of star motifs set within circular rings running across the mid-rail
Lower Composite Panel
- Solid wood-effect composite boards run vertically across the full lower section
- Diagonal cross bracing spans the panel corner to corner for a farmhouse-style finish
- A single black star motif is set at the centre point where the braces cross
Build and Materials Shown in the Render
The frame of this composite side gate is finished in a dark, almost black tone that contrasts against the warm oak-toned composite boarding beneath. The metalwork appears as a rigid perimeter frame holding both the railed top and the boarded base, with a side-mounted handle and latch fitted at working height on the right-hand edge, along with hinge fittings visible along the left side of the frame.
Why This Style Suits a Side Passage
A composite side gate like this one is well suited to narrower access points where security and appearance both matter. The open railed top allows light and visibility through the upper portion, while the solid composite lower panel screens bins, storage, or a passageway from view, and the star and scroll detailing adds a decorative finishing touch rather than a plain flat panel.
Frequently Asked Questions
What material is the lower panel made from?
The lower section of this composite side gate is shown as solid wood-effect composite boarding, arranged vertically with diagonal bracing across the face.
Does this gate offer privacy as well as decoration?
Yes, the design combines an open decorative metal top with a fully boarded composite base, so the lower half of the gate blocks sightlines while the top retains an ornamental, airy appearance.
Is this composite side gate suitable for a side passage or garden entrance?
The proportions and single-leaf layout shown in the render are typical of a side gate style, designed for narrower access points such as passageways or garden entrances rather than a full driveway opening.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
