Composite Side Gate | Side Gates | CSG34
Original price was: £474.30.£300.00Current price is: £300.00.+ Price depends upon Sizes
This composite side gate design combines a top row of ball-detail bars with a middle section of horizontal slats and vertical bars, above a base of three horizontal wood-effect composite boards, all set in a dark metal frame.
Description
This composite side gate mixes several bar and slat patterns in one frame, finished with a solid wood-effect base. The drawing shows a single-leaf gate in a dark metal frame: a row of ball-detail bars across the top, a middle band of horizontal slat panels either side of a vertical-bar centre, and three horizontal wood-effect composite boards below.
Design Details of This Composite Side Gate
Top Section
- A row of evenly spaced vertical round bars, each with a ball detail near the middle
- A solid horizontal rail separating the top row from the middle section
Middle Section
- Left and right panels hold horizontal flat slats above a shorter run of ball-detail bars
- The centre panel is filled with vertical bars and three ball accents at its middle
- Framing uprights divide the three panels
Lower Composite Panel
- Three horizontal wood-effect composite boards in a light oak tone
- The solid base screens the bottom of the gate from view
Frame and Fittings
- Dark metal perimeter frame
- Hinge lugs on the left edge and a handle with keyhole on the right
How This Design Works in Use
The open bar and slat sections let light and a view through most of the gate, while the boarded base keeps the lowest part of the opening private. A gate like this suits a side passage or garden entrance where a varied, decorative pattern is wanted alongside a screened lower section.
Made to Your Opening
Like our other made-to-measure gates, this design is manufactured in the UK to the width and height of your opening. After you order or request a quote, our team confirms the size and finish details with you by email or phone before manufacture begins. For help choosing, call 02089116000.
Frequently Asked Questions
What is the lower panel made from?
The base is shown as three horizontal wood-effect composite boards set inside the metal frame.
Is this a single or double gate?
The drawing shows a single-leaf gate, with hinges on the left and the handle on the right.
Can the size be changed?
Yes. The gate is made to the size of your opening, and our team confirms the exact dimensions and finish with you before manufacture.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
