Aluminium Bi Fold Gates

Bi-fold gates are made from multiple panels connected by hinges. As the gate opens, the panels fold against each other in a concertina motion rather than swinging out as one large leaf. This means the gate needs much less depth in front of or behind the opening compared to a standard swing gate of the same width.

The folded stack width depends on the number of panels and the overall opening width. Each panel folds back on itself, so the stacked depth is typically around the panel width multiplied by the number of panels in each leaf, plus hinge allowances. We work out the exact stack dimensions for your opening before production so you know precisely what space to allow.

Bi-fold gates work well for wider openings where a single-leaf swing gate would be impractical. Very narrow openings may not suit the folding format, as you need enough width for a meaningful number of panels. We discuss your opening size and site layout before confirming the best panel count and configuration.

Most aluminium bi-fold gates use a bottom track or guide channel to keep the folding panels aligned and stable as they open and close. Some designs use a top-hung system with a guide at ground level only. The right option depends on your driveway surface, fall, and whether you want a visible track in the ground.

Panel count depends on the opening width, available stack space, and the weight each hinge run can carry comfortably. Common configurations use two, three, or four panels per leaf, but we can work with you on the right number for your specific opening and site constraints.

Aluminium is lighter than steel, which matters more on a bi-fold gate than on a standard swing gate. Every panel and hinge carries load through the folding mechanism when the gate moves, so lighter panels reduce strain on hinges, hinge pins, and track components. Aluminium is also naturally corrosion-resistant, which suits outdoor use.

Yes, bi-fold gates can be automated with electric motor kits designed for folding gate operation. Because aluminium panels are lighter than steel equivalents, the motor works against less weight during opening and closing. Automation can be specified at order or retrofitted, depending on the gate design and site power supply.

A level or gently sloping driveway is easier to work with, as the track or guide system needs consistent ground alignment along the gate travel. Steeper slopes can still be accommodated in some cases, but we need to review your site levels before confirming the design and track arrangement.

Clean the panels with a cloth or sponge and soapy water. Lubricate the hinges and any track rollers periodically to keep the folding action smooth and reduce wear on moving parts. Regular checks of the track for debris will help the gate open and close cleanly.

Yes, bi-fold gates can be configured to stack on the left or right of the opening depending on your driveway layout and where you want the folded panels to sit when open. We confirm the handing direction with you before production.