Commercial Gates | Double Gates | CG10
£383.80+ Price depends upon Sizes
This is a double-leaf mesh commercial gate design with a green-finished steel frame divided into four mesh panels per leaf. The tight weld mesh infill combines strong visibility with a secure barrier, making it well suited to commercial and industrial boundaries.
Description
The CG10 is a double mesh commercial gate design shown here as a full technical line drawing, illustrating two matching leaves finished in green with a fine weld mesh infill. Each leaf is divided into a 2×2 arrangement of mesh panels by horizontal and vertical cross rails, giving the layout a structured, symmetrical appearance suited to commercial and site entrance applications.
Design Features of the CG10 Mesh Gate
This double mesh commercial gate is drawn with a robust perimeter frame and internal rails that split each leaf into four equal mesh sections, creating a clean grid pattern across the full width of the gate.
Mesh Infill and Frame
- Tight, small-aperture weld mesh infill visible across all eight panels
- Bold green-finished box-section frame surrounding each panel
- Horizontal and vertical mid-rails creating the 2×2 panel division on each leaf
Hardware Detail
- Hinge points marked at the top and bottom outer corners of each leaf
- A central drop-bolt or locking mechanism shown at the meeting point of the two leaves
- Leaves designed to meet centrally, forming a full double-gate closure
Specifications Shown in the Drawing
The specification of this double mesh commercial gate, as drawn, includes a matched pair of leaves of equal width, each framed in green box-section steel with a dense mesh infill throughout.
- Two equal-width leaves forming a symmetrical double gate
- Four mesh panels per leaf, eight panels in total
- Green-coated frame and mesh finish throughout
- Central locking point positioned where the two leaves meet
Why Choose This Commercial Gate Design
This double mesh commercial gate suits sites where visibility through the barrier is required alongside a defined physical boundary, such as compounds, depots, or commercial car parks. The sectioned panel layout distributes structural rails evenly across the gate, supporting the mesh infill along its full height and width, while the green finish gives a consistent, tidy appearance across both leaves.
Frequently Asked Questions
What type of infill does the CG10 double mesh commercial gate use?
The drawing shows a fine, tightly spaced weld mesh infill fitted within each of the eight framed panels across the two leaves.
How many panels make up each leaf of this mesh gate?
Each leaf of the CG10 is divided into four mesh panels by horizontal and vertical mid-rails, giving a balanced 2×2 grid per leaf.
Where is the locking mechanism positioned on this double gate?
The drawing indicates a central drop-bolt style locking point located where the two leaves meet in the middle of the gate.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
