Commercial Gates | Double Gates | CG2
£386.22+ Price depends upon Sizes
This design shows a pair of green double swing gates with dense vertical bar infill and bold diagonal cross-bracing forming a diamond pattern across each leaf. The heavy-duty frame and central locking box shown in the drawing suit commercial or high-security entrances.
Description
This technical drawing outlines the CG2 design, a pair of green double swing gates built for commercial and high-traffic entrances. Each leaf shows dense vertical bar infill combined with bold diagonal cross-bracing that forms a striking diamond, or bowtie, pattern running from top to bottom of the gate. The layout, complete with a central locking box and clearly marked hinge points, is designed to suit sites needing both strength and a clean, symmetrical appearance.
Design Details of These Green Double Swing Gates
The drawing shows two equal-width leaves that meet centrally, a typical configuration for these green double swing gates where wide vehicle or pedestrian access is required.
Vertical Infill Pattern
- Closely spaced vertical bars running the full height of each leaf
- Consistent bar spacing shown across both panels for a uniform finish
- Green-finished frame and infill as indicated throughout the drawing
Diagonal Bracing
- Upper and lower diagonal braces on each leaf forming a diamond/hourglass shape
- Braces connect from the outer top and bottom corners into a central mid-height point
- Adds visible structural framing in addition to the vertical infill
Specifications Shown in the CG2 Drawing
The drawing indicates a rectangular double swing gate layout with marked hinge positions and a central locking arrangement, useful reference points before ordering.
- Two-leaf swing gate configuration, split evenly down the centre
- Three hinge fixing points marked on each outer post side (top, middle, bottom)
- Central locking box positioned where the two leaves meet
- Full-height vertical bar infill across both leaves
- Green powder-coated finish as shown on the frame and bars
Why This Double Gate Design Works for Commercial Sites
These green double swing gates combine a dense vertical infill with reinforced diagonal bracing, giving the design a robust look suited to gateways, compounds, and larger driveway entrances. The symmetrical bowtie bracing on each leaf is not only a visual feature but also reinforces the frame at key stress points, while the marked hinge and lock positions in the drawing make it straightforward to plan installation.
- Suits wide openings requiring a two-leaf swing gate
- British made design available with nationwide UK delivery
- Vertical bar spacing shown restricts sightlines while allowing airflow and visibility
Frequently Asked Questions
What material is shown in this gate drawing?
The drawing depicts a metal-framed design with vertical bar infill, finished in green as illustrated throughout the CG2 sketch.
Is this gate design suitable for wide driveways or commercial entrances?
Yes, the double-leaf layout shown in this drawing is intended for wider openings, such as commercial gateways or larger driveways requiring two swing gates.
Where is the locking mechanism positioned on these green double swing gates?
The drawing marks a central locking box at the meeting point of the two leaves, with hinge fixings indicated on each outer edge.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
