Commercial Gates | Double Gates | CG9

Description

This commercial mesh double gate design, shown as reference CG9, illustrates a twin-leaf entrance gate built from a heavy box-section frame finished in green with a fine square mesh infill across every panel. The technical drawing sets out a symmetrical layout, with each leaf split into four bordered sections and reinforced with diagonal cross bracing running corner to corner, giving the structure a rigid, industrial appearance suited to commercial or site entrances.

Panel Layout and Bracing

The commercial mesh double gate is divided by a central vertical post and a horizontal mid-rail on each leaf, creating four equal mesh-filled quadrants per side.

Diagonal Cross Supports

• Each quadrant carries an X-shaped diagonal brace, doubling the bracing bars visible within every panel
• The bracing pattern is repeated identically across both leaves for a balanced, symmetrical finish
• Diagonal bars are set within the same green frame finish as the outer perimeter

Mesh Infill

A tight square mesh fills every panel behind the bracing, offering a screened barrier while still allowing sightlines through the gate.

Frame Construction Shown in the Drawing

The outer frame of this commercial mesh double gate is drawn as a substantial perimeter section, noticeably heavier than the internal dividing bars and diagonal braces.

• Top, middle and bottom hinge points are marked on the outer edge of each leaf with circular fixing details
• A central locking box and latch keep are positioned where the two leaves meet, allowing the gates to be secured centrally
• The frame is shown in a solid green finish throughout, front and back faces

Where This Design Suits

The proportions and bracing style captured in this drawing point to a gate intended for wider commercial openings requiring a robust double-leaf entrance.

• Suitable for commercial yards, depots, and industrial access points
• Double-leaf format allows for a wide clear opening when both gates swing back
• Mesh infill maintains visibility across the entrance while forming a physical barrier

Frequently Asked Questions

What material is shown in the CG9 commercial mesh double gate design?

The drawing shows a metal box-section frame finished in green, with a fine square mesh infill and diagonal cross bracing on each panel.

How many hinge points does the drawing show?

Each leaf of the commercial mesh double gate is shown with three hinge fixing points along its outer edge, positioned at the top, middle, and bottom of the frame.

Can this double gate design be adapted to different widths?

The panel and bracing layout shown can typically be adapted to suit a range of opening widths, as the design is based on repeating braced mesh sections per leaf.