Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS19

Description

This black metal sliding gate is built around a dense run of vertical slats spanning a wide single panel, gliding smoothly along a floor-mounted track on visible support wheels. It’s a striking option for driveways that need strong privacy screening combined with a clean, contemporary black finish, and the cantilever-style sliding action means no swing arc is needed on either side of the opening.

Design of This Black Metal Sliding Gate

The panel is made up of tightly spaced vertical bars set within a robust horizontal top and bottom frame, giving the gate a solid, screened appearance rather than an open, see-through design.

Vertical Slat Panel

• Uniform vertical bars run the full height of the gate for a continuous, linear look
• Tight spacing between slats limits visibility through the gate while still allowing airflow
• Matte black finish gives a modern, understated appearance against the driveway and greenery

Sliding Track System

• Gate runs along a ground-level track using a set of visible support wheels
• Cantilever-style operation suits driveways where a swing gate would be impractical
• Frame is boxed and reinforced at the base to carry the weight of the sliding panel

Why This Black Metal Sliding Gate Suits Wide Driveways

A black metal sliding gate of this style works well where there’s enough side space to slide the panel clear of the opening but not enough room for a gate to swing inward or outward. The full-slat construction also blocks sightlines into the property while the black powder finish keeps the overall look sharp against paving, brickwork or planting.

• Wide single-panel design suited to vehicle and pedestrian access points
• Solid slat construction offers a strong visual barrier along the boundary
• Black finish complements chain-link, railing or hedge boundaries alongside it

Specifications Visible on This Model

This metal sliding gate is finished in matte black with a fully framed vertical slat infill and a track-and-wheel running system fitted to the base of the panel.

• Material: welded metal frame with vertical bar infill
• Finish: black powder-coated surface
• Operation: manual or motor-ready sliding action along a fixed track
• Mounting: floor-mounted track with rolling support wheels

Frequently Asked Questions

Is this black metal sliding gate suitable for wide driveway openings?

Yes, the single-panel sliding design shown here is intended for wide vehicle openings where the gate slides sideways along a track rather than swinging open.

Does the vertical slat design allow any visibility through the gate?

The slats are spaced closely together, so the gate offers a largely solid, screened appearance with minimal visibility through the panel.

Can this sliding gate be motorised?

The track and wheel system shown is compatible with automation, allowing a motor to be added to the sliding mechanism if required.