Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS20
£746.59+ Price depends upon Sizes
This is a black metal sliding driveway gate featuring closely spaced vertical slats and a robust bottom-track sliding mechanism, framed neatly between two stone pillars. The solid slatted design offers strong privacy and boundary security while still allowing glimpses of the greenery beyond.
Description
This metal sliding driveway gate is finished in a deep matt black and built from a tight run of vertical slats, creating a solid, uniform screen across the full width of the driveway opening. Framed by natural stone pillars and running smoothly along a floor-mounted track, it combines a clean architectural look with genuine privacy for the property behind it.
Design and Visible Construction
The strength of this metal sliding driveway gate lies in its simple, repeating slat pattern and heavy-duty horizontal top and bottom rails that hold everything square.
Vertical Slat Panel
- Narrow, evenly spaced vertical bars finished in solid black
- Slats are close-set to reduce visibility through the gate from the street
- Clean top and bottom rail lines give a tidy, linear profile
Sliding Track System
- Ground-level track and roller housing visible along the base of the gate
- Gate glides horizontally to one side rather than swinging inward or outward
- Compact wheel unit sits flush against the driveway surface
Where This Sliding Gate Works Best
A metal sliding driveway gate of this style suits driveways where space is at a premium and a swinging gate would be impractical, such as sloped or narrow entrances.
- Positioned between two solid stone pillars for a framed, finished appearance
- Ideal for driveways bordered by hedging or planting, as seen behind the gate in the photo
- Suited to properties wanting a private, screened entrance rather than an open bar-style gate
Finish and Materials
The black metal finish gives the gate a sharp, contemporary contrast against the natural stonework of the pillars either side.
- Solid metal slats set within a rigid perimeter frame
- Consistent matt black coating across all visible surfaces
- Simple, unfussy lines that pair well with both modern and traditional stone entrances
Frequently Asked Questions
Is this metal sliding driveway gate suitable for narrow driveways?
Yes, the sliding mechanism means the gate moves sideways along its track rather than swinging into the driveway, making it a practical choice where space in front of or behind the gate is limited.
Does the vertical slat design offer privacy?
The closely spaced vertical slats shown in the photo create a fairly solid screen, limiting direct sightlines through the gate while still allowing some light and airflow between the bars.
Can this gate be fitted between existing stone pillars?
This style of metal sliding driveway gate is designed to sit within a defined opening such as the stone pillars pictured, with the track and gate width measured to suit the existing entrance.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
