Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS26
£752.65+ Price depends upon Sizes
This is a heavy metal cantilever sliding gate finished in green powder coating with a perforated mesh infill panel. It offers a solid, secure driveway entrance with a sleek horizontal-rail design suited to larger openings.
Description
This green metal sliding gate is built as a heavy-duty cantilever system, gliding on a floor-mounted track without the need for a bottom guide rail across the driveway surface. Finished in a deep green powder coat, the gate combines a solid perforated infill with horizontal box-section rails for a robust, secure look ideal for wider vehicular entrances.
Design and Construction of This Metal Sliding Gate
The frame of this metal sliding gate is built from box-section steel, arranged into three horizontal bands that divide the gate into clean, evenly spaced panels.
- Perforated steel mesh infill fitted within each panel section
- Heavy top and bottom horizontal rails for structural rigidity
- Cantilever roller mechanism visible along the base for smooth sliding operation
- Robust support post fitted with a motor housing for automated operation
Perforated Infill Panels
The mesh-style perforated panels seen across the gate allow partial visibility through the barrier while still presenting a solid, uniform appearance from the driveway approach.
Finish of the Green Sliding Driveway Gate
A powder-coated green finish covers the full frame and infill panels, giving the gate a smooth, even surface tone that sits well against hedging and greenery.
- Even powder-coated colour across frame and perforated sections
- Smooth painted edges along the top and bottom rails
- Consistent finish suited to both the fixed post and moving gate leaf
Where This Metal Sliding Gate Works Best
Its cantilever track design makes this metal sliding gate a practical choice for driveways where a swinging gate would be impractical due to space or ground slope.
- Suited to wide residential or commercial driveway openings
- Compatible with automation, as shown by the motor housing at the post
- Track-free ground surface keeps the driveway clear of trip hazards
Frequently Asked Questions
Is this metal sliding gate suitable for automation?
Yes, the gate is shown fitted with a housing unit at the support post, indicating it is set up to work with an automated sliding gate motor system.
Does the perforated panel design still offer privacy?
The perforated mesh infill provides a degree of screening while allowing some visibility through the gate, striking a balance between openness and boundary definition.
What finish does this sliding gate have?
The gate is finished in a green powder coating applied across the frame, rails and perforated panels for a consistent overall appearance.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
