Commercial Gates | Double Gates | CG1
£380.69+ Price depends upon Sizes
This design shows a pair of green commercial mesh double gates with a dense diamond lattice infill set over a finer square mesh backing. The double-layer mesh pattern and robust perimeter frame give strong visual security while allowing sightlines through the gate.
Description
This drawing presents a pair of commercial mesh double gates finished in a deep green powder coat, built around a bold diamond lattice infill layered over a tighter square mesh grid. The design shows a symmetrical two-leaf layout with a heavy-gauge perimeter frame, making it a strong option for sites that need a secure yet visually open barrier at a vehicle or pedestrian entrance.
Design Detail Shown in the Drawing
The sketch of these commercial mesh double gates highlights a repeating diamond trellis pattern running across both leaves, backed by a smaller square mesh layer for added infill density.
Frame and Mesh Layout
- Two equal-width leaves within a rectangular outer frame
- Diamond lattice overlay set on top of a fine square mesh backing
- Consistent border rail framing the mesh infill on all sides of each leaf
Meeting Stile Detail
- A square cut-out is marked at the centre meeting point of the two leaves, positioned for a lock or securing mechanism
- Vertical meeting stiles align flush where the two gate leaves close together
Specifications Visible in the Design
As drawn, these commercial mesh double gates are shown with four hinge points marked along the outer edges of the frame, two per leaf, indicating a heavy-duty double-leaf hanging arrangement.
- Two-leaf, equal-split gate configuration
- Green painted finish across frame and mesh infill
- Diamond lattice pattern layered over a square mesh grid for a dual-density infill
- Central square cut-out at the meeting stiles for locking hardware
- Hinge positions marked at top and bottom of each outer stile
Where This Gate Style Suits
The layout of these commercial mesh double gates suggests a design intended for commercial or industrial entrances where a wide opening, controlled access, and a secure mesh infill are all required together.
- Wide vehicle or dual-access entrances needing a split gate
- Sites where visibility through the gate is preferred alongside a secure barrier
- Locations where a robust frame and dense mesh infill are specified for perimeter security
Frequently Asked Questions
What material is shown in the drawing of these commercial mesh double gates?
The drawing shows a metal frame and mesh infill finished in green, with a layered diamond lattice pattern set over a finer square mesh grid.
How many hinges are shown on this double gate design?
The drawing marks four hinge points in total, two positioned along the outer edge of each leaf.
Is there a locking point included in the design?
Yes, the drawing shows a square cut-out centred at the meeting stiles of the two leaves, positioned for a lock or securing mechanism to be fitted.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
