Cantilever Sliding Driveway Gate — Black Horizontal Slat Design
This is a black powder-coated cantilever sliding driveway gate featuring horizontal slat infill and a curved top rail that arcs down towards the automatic motor unit. Its cantilever design means no ground track is needed, giving a clear, unobstructed driveway surface.
Description
This cantilever sliding driveway gate is finished in solid black powder coating and built with a heavy-duty steel frame carrying evenly spaced horizontal slats. The distinctive curved top rail sweeps down from the gate’s tallest point to meet the cantilever support arm and motor unit at ground level, giving the whole structure a strong, architectural profile as it glides open across the driveway.
Design and Build of This Cantilever Sliding Driveway Gate
The horizontal slat infill runs the full width of the gate, creating a clean, linear look while still allowing light and airflow through the panel. As a cantilever sliding driveway gate, it operates entirely on an internal roller system housed within the gate frame and its support post, so there is no track set into the driveway surface.
Curved Top Rail
The top edge of the gate arcs smoothly downward towards the drive side, tapering the frame as it approaches the automatic motor housing — a detail that also reduces the visual bulk of the gate when fully open.
Cantilever Mechanism
The cantilever arm and roller carriage sit low along the gate’s base rail, keeping the mechanism compact and out of the way of foot and vehicle traffic on the paved surface shown in the photo.
Where This Sliding Gate Works Best
This style of cantilever sliding driveway gate suits driveways where a ground-mounted track isn’t practical, such as sloped, uneven, or block-paved surfaces like the one pictured. Because the gate is fully supported by the cantilever arm and internal rollers, the paving underneath stays free of channels or rails.
- No ground track required across the driveway entrance
- Suits block paving, tarmac, or uneven driveway surfaces
- Horizontal slat design offers a contemporary, linear appearance
- Compact motor unit fitted at the base of the support post
Finish and Operation
The gate is powder coated in black, giving an even, matt-toned finish across the frame and slats as seen in the photo. It is set up for automatic operation via the fitted motor and roller carriage, with the option of manual operation also available.
- Black powder-coated steel frame and horizontal slats
- Curved top rail tapering down to the cantilever arm
- Automatic motor unit fitted at the base of the gate post
- Manual or automatic operation available
Frequently Asked Questions
Does a cantilever sliding driveway gate need a track in the ground?
No. This gate design uses an internal roller system and cantilever arm to support its full weight, so there is no track cut into the driveway surface, as shown in the photo where the gate sits directly on paving.
Can this gate be operated manually as well as automatically?
Yes, the gate can be supplied for either manual or automatic operation, with the motor unit shown fitted at the
