Metal Bifold Gates | Folding Doors | Metal Gates | Two-Pronged Gates | Driveway Bifolding Gates |UKMBF11
£664.60+ Price depends upon Sizes
A black powder-coated vertical bar metal gate designed to follow the incline of a stepped pathway or sloped driveway. Its flat-top bars and sturdy square posts give a clean, secure boundary that adapts neatly to uneven ground.
Description
This stepped metal driveway gate is built with vertical flat-top bars that rake downward in line with the paved steps of the driveway, creating a continuous black barrier that follows the natural fall of the ground rather than sitting awkwardly above it. Finished in a deep matte black, the gate combines a tidy vertical bar design with robust square-section posts, making it a practical solution for properties where the drive or path changes level.
Design Features of This Stepped Metal Driveway Gate
The standout feature of this stepped metal driveway gate is the angled top rail, which steps down bar by bar to match the slope of the pathway below it.
Vertical Bar Construction
- Evenly spaced vertical bars with a flat, spear-free top edge
- Consistent bar spacing maintained even as the gate rakes downhill
- Square box-section gate posts fitted with protective caps
Finish and Hardware
- Smooth black powder-coated finish throughout
- Visible drop bolt and latch hardware for secure closing
- Matching fixed panel sections either side of the gate opening
Where This Stepped Metal Driveway Gate Works Best
Because the frame is designed to follow a slope, this stepped metal driveway gate suits properties with graded or terraced driveways, side entrances with stone steps, or paths that lead up towards a raised property line.
- Sloped or stepped driveways and side access paths
- Front boundary sections next to rendered walls or brickwork
- Combined driveway and pedestrian access points
Specifications Visible on This Gate
The photo shows a self-supporting vertical bar gate paired with matching upright fence panels, all finished in the same black coating for a uniform boundary line.
- Material: powder-coated metal box-section posts and bars
- Colour: black
- Top profile: stepped/raked to follow ground level
- Fixings: mounted onto paved surface with visible base plates
Frequently Asked Questions
Can this stepped metal driveway gate be fitted on a sloped path?
Yes, the raked top rail is specifically designed to follow the gradient of a stepped or sloped driveway, so the bars stay level with the ground as it rises or falls.
What finish does this gate come in?
As shown, the gate has a black powder-coated finish across both the vertical bars and the square gate posts, giving a consistent look with any matching fence panels.
Is this gate suitable for both vehicle and pedestrian access?
The vertical bar layout and latch hardware shown make it suitable for pedestrian side access or narrower driveway openings; wider vehicle entrances can be configured using matching panel sections.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
