Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS24
£750.41+ Price depends upon Sizes
A black powder coated metal sliding gate with vertical bar railings, fitted with a cantilever track system alongside a matching pedestrian gate. Its slimline bars give clear sightlines onto the driveway while providing strong perimeter security.
Description
This metal sliding driveway gate is finished in black with a run of evenly spaced vertical bars, shown here sliding on a cantilever track past a brick pillar with a matching pedestrian gate alongside. It combines an open, sightline-friendly design with the solid security of heavy-gauge metal construction, making it a practical choice for wider driveway openings where a swinging gate isn’t suitable.
Design of This Metal Sliding Gate
The framework of this metal sliding driveway gate uses a top and bottom horizontal rail with slim vertical bars set at regular intervals, giving a clean, uniform look that suits both modern and traditional properties.
Vertical Bar Railings
The tightly spaced bars allow visibility through to the garden and driveway beyond while still forming a continuous physical barrier along the boundary line.
Cantilever Sliding Action
As pictured, the gate glides along a track fixed at the base, sliding clear of the driveway entrance without swinging into the road or garden space.
Build Quality of the Metal Sliding Gate
Constructed from heavy metal sections, this sliding gate is built to stand up to daily opening and closing without losing its shape or rigidity.
- Solid vertical bar infill with reinforced top and bottom rails
- Smooth-running track-mounted sliding mechanism
- Black powder coated finish covering the full frame and bars
- Matching pedestrian side gate shown fitted to the same brick pillar
Finish and Installation
The powder coated black finish gives the metal sliding gate a smooth, even surface across all bars and rails, with no visible brush marks or inconsistencies in the coating.
Marketed as easy to install, this gate is designed to be fitted onto standard brick or block piers using the same fixing points shown in the photo, and works well alongside a separate pedestrian gate for everyday foot access without opening the full sliding gate.
Frequently Asked Questions
What material is this sliding gate made from?
It is made from heavy metal, finished with a black powder coated surface, as shown in the photo.
Is this gate suitable for wide driveway entrances?
Yes, the cantilever sliding design shown is intended for driveways where a swinging gate would need too much clearance space.
Does it come with a separate pedestrian access gate?
The image shows a matching smaller pedestrian gate fitted alongside the main sliding gate on the same brick pillar, giving separate walk-through access.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
