Metal Railings | Iron Fencing | Window Security Grill Bars | Metal Grilles |UKMR32
Original price was: £186.12.£180.00Current price is: £180.00.+ Price depends upon Sizes
This design shows a run of metal spear top railings with evenly spaced vertical pickets finished in pointed heads, set between two decorative posts topped with ball finials. The layout offers a traditional, secure boundary treatment suited to front gardens, driveways, and perimeter fencing.
Description
This technical drawing presents a classic run of metal spear top railings, built from evenly spaced vertical bars that rise to sharply pointed spear heads along the top edge. Flanked by two substantial posts finished with ball-style finials, the design is intended to sit atop a low wall or plinth, as indicated by the ground-fixing detail at the base, making it a strong option for defining boundaries with a traditional character.
Design Features of These Metal Spear Top Railings
The drawing sets out a repeating picket layout that gives this style of metal spear top railings its distinctive rhythm and silhouette.
Pointed Picket Line
- Vertical bars spaced at regular, consistent intervals across the full panel width
- Each bar terminates in a pointed spear head, forming a uniform decorative crest along the top rail
- A horizontal top rail and base rail hold the pickets in a rigid, framed panel
Post Detailing
- Twisted or textured post finish shown on both end posts, adding a decorative accent
- Ball-and-urn style finials capping each post above the top rail line
- Base fixing points marked with dashed lines, indicating ground or plinth mounting
Specifications Shown in the Drawing
As set out in the line drawing, this metal spear top railings panel is designed as a linear run rather than a swinging gate, suited to fencing and boundary sections.
- Panel construction with two fixed end posts and a continuous run of vertical pickets
- Uniform picket spacing suitable for garden, driveway, or perimeter boundary use
- Spear top finish applied consistently across every picket for a matched appearance
- Design intended for surface or in-ground post fixing, as shown by the base detailing
Why Consider This Railing Style
The spear top profile shown in this drawing gives these metal spear top railings a defined, traditional look that suits period properties as well as more contemporary boundary schemes. Because the pickets and posts are drawn as a matched, repeating unit, the design lends itself to being extended in continuous runs along a boundary line, with each section following the same picket spacing and finial detailing for a consistent finish from one end to the other.
Frequently Asked Questions
What material are these railings made from?
The drawing depicts a metal railing design, shown with the typical bar and finial detailing associated with wrought iron or fabricated steel fencing.
Can this railing design be used alongside a matching gate?
Yes, the spear top picket style and post finials shown in this drawing are designed to be paired with a matching gate for a consistent boundary appearance.
Is this railing suitable for mounting on a wall or plinth?
The base detail in the drawing indicates fixing points suited to mounting on a low wall or plinth, as well as direct ground fixing where required.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
