Metal Driveway Gates | Wrought Iron Driveway Gates | Front Driveway Gate | Gates |
SKU: UKMDG208
Original price was: £735.53.£14.90Current price is: £14.90.+ Price depends upon Sizes
A pair of black metal framed driveway gates fitted with natural timber board infill panels and a horizontal support rail. The sturdy steel frame holds the wood securely in place, giving a warm timber look with the added strength of a metal structure.
Description
These metal frame timber driveway gates combine a robust black steel outer frame with natural timber board infill panels, creating a striking double-leaf entrance gate. Fitted with an automated opening mechanism housed within the gate post, this pair offers the warmth of a wood finish backed by the structural rigidity of a metal frame, ready to sit neatly across a concrete driveway entrance.
Design and Build of These Metal Frame Timber Driveway Gates
Each leaf of these metal frame timber driveway gates is constructed around a heavy-duty black powder-coated steel perimeter frame, with vertical timber boards fitted tightly edge to edge to form a fully solid, private infill.
Frame and Panel Detail
- Black box-section steel outer frame running around each gate leaf
- Vertical natural timber cladding boards with a warm wood-tone finish
- Horizontal mid-rail dividing the timber infill into upper and lower sections for added rigidity
- Full-height solid coverage for complete privacy from the driveway approach
Automation Fitted to This Driveway Gate Set
This particular set of metal frame timber driveway gates is shown with an automated drive unit mounted on the hinge post, allowing the gates to open and close without manual pushing.
- Motor and control housing built into the supporting gate post
- Twin-leaf swing configuration suited to wide driveway openings
- Mounted directly to a rendered brick pillar for a clean, integrated look
Where These Gates Suit Your Property
The combination of a dark steel frame and natural timber infill on these metal frame timber driveway gates suits properties bordered by greenery, timber fencing, or stone walls, as seen against the hedge and wooden fence panels in this installation.
- Solid timber infill screens the driveway from passing view
- Black frame provides a neutral contrast against natural wood tones
- Suited to wide concrete or block-paved driveway entrances
Frequently Asked Questions
Can these metal frame timber driveway gates be fitted with automatic opening?
Yes, this design accommodates an automated drive system, as shown fitted within the gate post in the photo, allowing the gates to open without manual handling.
Do the timber panels cover the full height of the gate?
Yes, the vertical timber boards run the full height of each leaf within the black steel frame, giving complete visual privacy across the driveway opening.
Are these gates suitable for wide driveway openings?
Yes, the double-leaf swing design shown here is built to span wide driveway entrances, with each leaf supported by its own steel frame and post fixing.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
