Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS3
£757.77+ Price depends upon Sizes
This is a dark grey metal sliding driveway gate built from closely spaced vertical slats set within a sturdy top and bottom frame. It slides neatly across the driveway entrance between brick piers, combining a sleek contemporary look with solid privacy and screening.
Description
This metal sliding driveway gate shown here features a run of closely spaced vertical slats finished in dark anthracite grey, gliding smoothly across a paved driveway entrance flanked by brick piers. It’s a strong choice for homeowners wanting a contemporary, high-privacy entrance that still lets the property feel open and welcoming.
Design of This Metal Sliding Driveway Gate
The standout feature of this metal sliding driveway gate is its dense vertical slat pattern, which runs the full width of the gate for consistent coverage from post to post.
Slat Construction
- Uniform vertical bars set tightly together for a clean, linear look
- Slats sit within a robust horizontal top and bottom rail
- Dark grey powder-coated finish visible across the entire structure
Sliding Mechanism
- Gate travels on a track system, sliding parallel to the driveway rather than swinging inward
- Compact footprint suits driveways where a swinging gate would obstruct space
Where This Sliding Driveway Gate Works Best
This style of metal sliding driveway gate suits properties with a straight or gently sloping driveway approach, as shown by the paved surface and brick pillar supports in the photo.
- Ideal for driveways bordered by brick or block walls
- Well suited to properties wanting screening from the road without a solid panel
- Ample width for vehicle access while maintaining a slim sightline from the slats
Finish and Visual Appeal
The dark grey powder-coated finish on this metal sliding driveway gate gives it a modern, understated appearance that complements traditional red brick as well as more contemporary render or stone finishes.
- Consistent colour and coating across all vertical slats and frame
- Slim slat profile creates a sense of height and movement along the driveway
- Neutral tone pairs with a wide range of brickwork and landscaping
Frequently Asked Questions
Is this metal sliding driveway gate suitable for wide driveways?
Yes, sliding gates of this vertical slat design are well suited to wide driveway openings, as the gate travels sideways along a track rather than needing swing clearance.
Does the gate offer privacy as well as security?
The tightly spaced vertical slats seen in the photo provide strong visual screening while still allowing some light and airflow through the gaps.
Can this gate be fitted between brick piers like the ones shown?
Yes, this metal sliding driveway gate is designed to be installed alongside supporting piers or posts, such as the brick pillars pictured either side of the opening.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
