Metal Driveway Gates | Metal Gates | Wrought Iron Driveway Gate | Gates | UKMDG201
£734.83+ Price depends upon Sizes
This drawing shows a wide, bow-topped wrought iron driveway gate made from two matching leaves, each finished with a curved row of decorative rings and slender spear finials along the mid-rail. The layout pairs open ring detailing above with closely spaced vertical bars below, giving a traditional look with a solid, secure infill pattern.
Out of stock
Description
This technical drawing sets out the design for an arched wrought iron driveway gate built as a matching pair of leaves that rise into a gentle bow-top curve. The layout combines a decorative ring border, slim spear finials and a dense lower infill of vertical bars, giving a classic wrought iron look with a solid, well-defined structure suited to a range of driveway openings.
Design Details Shown in the Drawing
The sketch of this arched wrought iron driveway gate sets out three distinct horizontal bands across each leaf, creating a layered visual rhythm from top to bottom.
Bow-Top Ring Border
Along the curved top edge, a continuous run of open circular rings follows the arch of each leaf, framed by the outer top rail and the vertical bars beneath. This ring detail is repeated again as a second horizontal band roughly halfway down the gate, tying the top and bottom sections together visually.
Spear Finials and Vertical Infill
Between the two ring bands sit a row of small spear-style finials sitting proud of the horizontal rail, adding a traditional wrought iron accent. Below the second ring band, the drawing shows a denser run of straight vertical bars extending down to the bottom rail, tighter in spacing than the bars used higher up the gate.
Construction Shown for This Driveway Gate
The drawing indicates a fully framed, two-leaf design for this arched wrought iron driveway gate, built from vertical bar sections set into top, middle and bottom horizontal rails.
- Twin-leaf configuration meeting at a centre closing point
- Bow-shaped top rail curving upward from each hinge post to the centre
- Mounting brackets marked at the top and bottom of each outer stile for post fixing
- Central lock and handle position shown where the two leaves meet
Specifications and Layout
As drawn, this arched wrought iron driveway gate is designed as a wide double-leaf opening, with each leaf mirroring the other in bar spacing, ring detailing and finial placement for a balanced, symmetrical appearance when closed.
- Two equal-width leaves with a shared bow-top profile
- Consistent vertical bar spacing across the upper and lower sections
- Decorative ring detailing repeated at two heights on each leaf
- Central lock point with visible handle and keep detail
Frequently Asked Questions
Is this arched wrought iron driveway gate suitable for wide openings?
The double-leaf, bow-top layout shown in the drawing is designed for wider driveway openings, with each leaf swinging independently from its own hinge post.
What material is used for this gate design?
The drawing depicts a wrought iron construction, using bar and rail sections for the frame, rings, spear finials and vertical infill shown throughout the design.
Can the ring and finial detailing be seen on both leaves?
Yes, the drawing shows the ring bands, spear finials and vertical bar spacing mirrored across both leaves for a symmetrical finish when the gate is closed.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
| Specifications
GATES |
Frame Section | Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
| Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
