Metal Bifold Gates | Folding Doors | Metal Gates | Two-Pronged Gates | Driveway Bifolding Gates |UKMBF15

Description

This metal bifold driveway gate is built from box-section steel formed into a grid of square lattice panels, giving a strong, uniform look across each folding leaf. Photographed in situ between rendered stone-topped brick pillars, the gate folds back in hinged sections rather than swinging outward, making it a practical choice for driveways where space for a traditional swing arc is limited.

Folding Panel Design of This Metal Bifold Driveway Gate

The gate is made up of multiple narrower panels joined by visible hinge points, allowing the whole structure to concertina back against the pillar as it opens. Each panel is finished in a deep black coating and divided into a repeating grid of small square sections, creating a consistent, structured pattern along the full width of the gate.

Panel Construction

• Multiple hinged folding sections rather than a single swinging leaf
• Square lattice grid pattern repeated across every panel
• Solid box-section metal framing visible around each square
• Bottom guide wheels fitted to support the folding action along the ground track

Automation Fitted to the Bifold Driveway Gate

A dedicated motor housing unit is mounted at ground level beside the gate, connected to the folding mechanism to allow powered opening and closing rather than manual operation. This automated setup is positioned discreetly to one side, keeping the gate’s grid design as the visual focus while still delivering hands-free access.

• External motor and control box fixed to a concrete base near the gate track
• Cabling routed neatly along the base of the folding panels
• Compatible with driveway entry points requiring automated access

Finish and Setting of the Metal Gate

The gate is finished in a solid black powder coating that contrasts against the pale stone-clad pillars and rendered boundary wall either side of it. It sits directly onto a paved driveway surface, with the folding track allowing the panels to sit flush when fully open, keeping the entrance clear.

• Uniform black coated finish across frame and grid sections
• Mounted between matching stone-topped pillars
• Low-profile ground track for smooth panel movement

Why Choose This Bifold Driveway Gate Style

A metal bifold driveway gate of this type suits driveways where a full swing gate would need more clearance than is available, since the folding panels stack neatly to one side instead of sweeping across the drive. The square grid design also allows a good level of visibility through the gate while still giving a defined, structured boundary line.

Frequently Asked Questions

Does this bifold gate need much space to open?

No, the folding panels concertina back against the pillar rather than swinging outward, so it needs far less clearance than a standard swing gate of the same width.

Is the gate automated as standard?

The gate shown is fitted with an external motor and control unit connected to the folding mechanism, allowing it to be opened and closed without manual pushing.

What finish does the gate have?

It has a solid black coated metal finish applied across the frame and the square lattice grid panels, matching the dark tone seen throughout the design.