Metal Sliding Gates | Metal Gates | Sliding Driveway Gates | UKMS40
£759.97+ Price depends upon Sizes
This is a anthracite grey metal sliding driveway gate with vertical slat infill and a decorative diamond lattice top section, running smoothly along a floor-mounted track. Its space-saving sliding action makes it ideal for driveways where a swinging gate would be impractical.
Description
This metal sliding driveway gate is finished in a deep anthracite grey and shown fitted between brick pillars, gliding along a floor-mounted track system. The design pairs a dense vertical slat lower section with a decorative diamond lattice top band, giving a strong sense of privacy without losing the open, airy look at eye level. A matching pedestrian side gate and wire mesh fencing complete the boundary, making this a coordinated entrance solution for a family home or driveway.
Design and Visible Features of This Metal Sliding Driveway Gate
The standout feature of this metal sliding driveway gate is the contrast between the tightly spaced vertical bars below and the crisscross diamond lattice pattern along the top rail.
Slat and Lattice Detailing
- Narrow vertical slats spanning the full width of the gate for a clean, linear look
- A decorative diamond lattice band running along the top edge for visual interest
- Consistent anthracite grey powder-coated finish across the gate, posts, and matching pedestrian gate
Track and Mounting
- Floor-mounted sliding track allowing the gate to run parallel to the boundary
- Sturdy square gate posts with pyramid-style caps supporting the sliding mechanism
- An automation control box mounted on the adjacent post, suggesting motorised operation
Why a Sliding Gate Suits This Type of Driveway
A sliding design is a practical choice when space behind the entrance is limited, since the metal sliding driveway gate moves sideways along its track rather than swinging inward or outward. This makes it well suited to driveways positioned close to a road or footpath, where a hinged gate could obstruct pavements or parked vehicles.
- Sideways sliding motion suitable for sloped or space-restricted driveways
- Wire mesh fence panels either side integrate the gate into a wider boundary line
- Compact pedestrian gate set beside the main sliding gate for everyday foot access
Specifications Visible on This Gate
The photograph shows a single-leaf metal sliding driveway gate constructed from metal box section and slat components, set within brick gate pillars.
- Material: powder-coated metal construction
- Colour: anthracite grey
- Top detail: diamond lattice cut-out pattern
- Bottom detail: close-set vertical slats
- Includes matching pedestrian side gate and wire mesh fence panels
Frequently Asked Questions
Is this metal sliding driveway gate suitable for automation?
The gate shown includes an access control box mounted on the post, indicating it is designed to work with a sliding gate motor and track system.
Does this gate come with matching fencing?
The image shows the gate installed alongside a pedestrian gate and wire mesh fence panels finished in the same anthracite grey colour for a coordinated look.
What is the top lattice section made from?
The diamond lattice band at the top of the gate is formed from the same powder-coated metal as the rest of the frame, creating a decorative cut-out pattern above the vertical slats.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
