Metal Railings | Iron Fencing | Window Security Grill Bars | Metal Grilles |UKMR33
Original price was: £187.50.£180.00Current price is: £180.00.+ Price depends upon Sizes
This technical drawing shows a metal railing panel with evenly spaced spear-top vertical bars, alternating between plain and decorative twisted sections, set between two capped posts. The design offers a traditional, secure boundary treatment with ornamental detailing built into every bar.
Description
This design drawing presents a traditional metal railing panel built from a run of evenly spaced vertical bars, each finished with a pointed spearhead tip along the top rail. The layout alternates plain square bars with sections of decorative twisted bar, giving the panel a classic wrought-iron character while the two flanking posts, each topped with a turned finial cap, frame the run and mark the fixing points at either end.
Design Features of This Metal Railing Panel
The drawing sets out a clear, repeating structure that balances security with ornamental styling.
Spearhead-Topped Verticals
Every vertical bar in the panel rises to a sharp spear-point finial, creating a continuous decorative skyline along the top edge while reinforcing the deterrent profile of the metal railing panel.
Twisted Bar Detailing
Interspersed among the plain bars are sections shown with a barley-twist pattern, adding visual rhythm and a hand-forged look to the otherwise straight vertical lines.
Capped End Posts
Square posts at each end of the panel are drawn with turned, urn-style finial caps, giving a finished bookend to the railing run and a clear fixing reference for installation.
Specification of the Metal Railing Design
The drawing indicates a panel built on two horizontal rails, top and bottom, with the vertical bars fixed rigidly between them for a solid, upright frame.
- Vertical bars with pointed spearhead tops running the full width of the panel
- Alternating plain and twisted bar sections for decorative contrast
- Top and bottom horizontal rails securing all vertical bars in place
- Square end posts finished with turned finial caps
- Dashed lines at the base indicating the ground-fixing line of the posts
Why Consider This Railing Panel Design
This metal railing panel suits anyone looking for a boundary or security fencing solution that combines a traditional aesthetic with a clean, uniform bar layout. The consistent spacing shown in the drawing makes it well suited to long garden or perimeter runs where a repeating pattern is required, and the finial-capped posts give a neat, finished appearance at gateways, corners, or panel joins.
Frequently Asked Questions
What is shown in this metal railing panel drawing?
The drawing sets out a single railing section with spear-topped vertical bars, alternating plain and twisted bar detailing, and two end posts with decorative finial caps.
Can the twisted bar sections be adjusted or omitted?
The layout in this drawing can be used as a reference for spacing and style, and variations to the bar pattern can be discussed as part of a made-to-order railing design.
Is this railing panel suitable for garden boundaries?
Yes, the repeating bar structure and post spacing shown make this metal railing panel design appropriate for garden perimeters, front boundaries, or linking sections between gate posts.
Specifications
We are the only manufacturing brand who not only provide bespoke design and sizes but also the specifications for gates.
Our material, size of rails, frames, infill bars and article designs are depending upon the requirements of each gate so you can get the best results. The standard size for side frame section starts at 40mm x 40mm but some basic side or garden gates can be made using 20mm x 10mm,20mm x20mm etc. frames as well. The specifications for all the premium gates will be decided by us according to the design and size of gates, we will give you the best option so that the quality of gate will not be compromised.
|
Specifications GATES |
Frame Section |
Top/Arch Section | Infill Bars | Privacy Sheet | Operating System | Gate Arts |
|
Driveway Gate |
40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Side Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Garden Gate | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Sliding Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Security Door | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Alleyway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| ¾ Split Driveway Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| BiFold Gate | 40mm X 40mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box ) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | Manual or Electric | Depend upon gate selection |
| Railing | 20mm X 20mm -100mm X 100 mm | 40mm X 8mm (Min Flat bar) or 40mm X 40mm(Box) | 12mm-20mm round bar, square bar(solid & hallow) | 1mm – 3mm thick | N/A | Depend upon railing selection |
How To Measure
- Take 3 measurements: Top, Middle and Bottom
- Use the smallest of widths as Total Gap Width
- This is all we need, leave the rest of fittings upon us.
Post & Hinges Guide
Any question please call Us on 02089116000 – we are happy to help.
