Metal roller shutter doors are steel doors that roll up into a drum above the opening, for garages, warehouses and commercial premises. Available with manual or electric operation; electric operation requires adequate space above the opening for the drum.
Roller shutters differ from an up-and-over garage door in their opening mechanism and the headroom they require. Made to measure in the UK to your exact opening. Call 02089116000 for a quote.
Frequently Asked Questions
How much space is needed above the opening for the roller shutter drum?
The drum and rolled-up curtain sit in a housing above the opening, so you need to allow clear headroom for the shutter to roll up fully. The exact space required depends on the door height and curtain thickness — contact us with your opening dimensions and we can confirm the required headroom for your specific door.
What is the difference between a roller shutter door and an up-and-over garage door?
A roller shutter door rolls vertically into a compact drum above the opening, so it doesn't swing outward or take up ceiling space inside the garage when open. An up-and-over door pivots outward and then back into the garage on ceiling tracks. Roller shutters are typically a better fit where driveway space in front of the garage is limited or where you want the full ceiling area kept clear.
Can a standard steel roller shutter door be motorised?
Yes. Steel roller shutter doors can be supplied with electric motors, either specified at the time of ordering or retrofitted later. Manual operation via a hand chain or crank is also available if you prefer a non-powered option.
What is the difference between manual and electric operation for a roller shutter?
Manual operation uses a hand chain, crank handle, or spring-assisted mechanism to raise and lower the curtain. Electric operation uses a tubular motor controlled by a wall switch, remote, or key fob. Electric motors are generally recommended for heavier steel doors or where the door is opened frequently.
How wide and tall can a standard steel roller shutter door be made?
Doors are made to measure, so there is no fixed size — we manufacture to your exact opening width and height. Practical limits depend on the curtain gauge, barrel diameter, and whether the door is motorised. Contact us with your dimensions and we can advise on the best configuration for your opening.
Is a steel or aluminium roller shutter door better for a garage?
Steel is generally stronger and less expensive than aluminium for roller shutter doors, making it the common choice for garages where security and cost are priorities. Aluminium is lighter and naturally corrosion-resistant, which can be beneficial in coastal or exposed locations, but it is typically more expensive. Both can be motorised.
Can a roller shutter door be installed on the inside or outside of the opening?
Both options are possible. The shutter can be mounted on the inside face of the opening, on the outside face, or between the reveals, depending on your wall construction and available headroom. We can advise on the best mounting position once we have your opening details.
Does a roller shutter door require guide rails, and how are they fitted?
Yes, the curtain runs in vertical guide rails fixed to either side of the opening. The rails are part of the door assembly and are included with the shutter. They can be face-fixed or reveal-fixed depending on how the door is mounted.
What finish does a steel roller shutter door come in?
Standard steel roller shutter doors are typically supplied with a galvanised finish as standard. Powder coating in a RAL colour is also available on request, with black and anthracite grey being popular choices for residential garages.
